Honeywell V2040ASL25 – 1″ NPT Thermostatic Radiator Valve
Description
- One-Pipe Steam Thermostatic Radiator Valves allow automatic temperature control in one-pipe steam or hot water systems for free standing radiators, convectors and other heating units with standard capacity requirements.
Product Features:
- Continually monitors and adjusts room temperature for consistent comfort and relief from under-heating and overheating
- Adjustable balancing cartridge design made from resilient material (EPDM), ensures tight shut-off on steam and hot water systems
- Nickel plated brass casted body
- Replaceable cartridge for easy service with service tool
- Controls include valve body, steam air vent
- Used with T100 set point and capillary actuators
- No electrical connection required for non-electric actuators
- Normally open without control mounted
Product Specifications:
- : Horizontal Angle Pattern 1 in. Valve for Standard Capacity Radiator
- Application Type: Replaces most manual valves with minimum piping changes
- Pipe Size (inch): 1 in.
- Pipe Size (DN): DN25
- Body Pattern: Horizontal Angle
- Capacity: Standard
- Capacity (Cv): 2.7 Cv
- Capacity (Btu/hr-steam): 70,500 Btu/hr
- Connection Type: Threaded
- Pressure Ratings (Hot Water): 150 psi maximum
- Pressure Ratings (Hot Water): 1034 kPa maximum
- Pressure Ratings (Steam): 15 psi maximum
- Pressure Ratings (Steam): 103 kPa
- Differential Pressure Ratings (psi): With T100 or T200 – 15 psi
- Differential Pressure Ratings (psi): With MV100 – 36 psi
- Differential Pressure Ratings (psi): For low noise -3 psi
- Differential Pressure Ratings (kPa): With T100 or T200 – 103 kPa
- Differential Pressure Ratings (kPa): With MV100 – 248 kPa
- Differential Pressure Ratings (kPa): For low noise -20 kPa
- Temperature Ratings (F): 248 F Maximum
- Temperature Ratings (C): 120 C Maximum
- Dimensions (in.): 1 7/16 in. x 2 15/16 in.
- Dimensions (mm): 37 mm x 74 mm
- Materials (Body): Nickel Plated Bronze
- Cartridge Change Tool: Yes – Use VA8200A001
- Used With: T100A, M and V controls to conform to horizontal mounting requirements
